Fabric Inspection Fold/Roll
Is to be use for multiple applications, In this machine there are following features in it.
- Firstly, it does inspection of the fabric to know if there any fault are there in fabric or to understand nature of it which came in factory for dyeing/printing/processing operations.
In other words, fabric is need to be check before starting any processes on it - Secondly, it roll fabric on paper tube or PVC pipe from fold/loose form.
- Thirdly, Rolls can be made from 100mm to 1000mm depending on need.
- Fourthly, Machine working width can be made from 1000mm to 3500mm depending on client’s need.
- Fifthly, Fabric ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be roll on this machine.
- Sixth and most importantly the speed can be achieve up to 40 meters per minute while preforming the process.
In conclusion, this machine is best suitable for garment industry or dyeing & printing units.
[spbsm-follow-buttons]
₹385,000.00
Compare
Fabric Inspection Fold/Roll
Is to be use for multiple applications, In this machine there are following features in it.
- Firstly, it does inspection of the fabric to know if there any fault are there in fabric or to understand nature of it which came in factory for dyeing/printing/processing operations.
In other words, fabric is need to be check before starting any processes on it - Secondly, it roll fabric on paper tube or PVC pipe from fold/loose form.
- Thirdly, Rolls can be made from 100mm to 1000mm depending on need.
- Fourthly, Machine working width can be made from 1000mm to 3500mm depending on client’s need.
- Fifthly, Fabric ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be roll on this machine.
- Sixth and most importantly the speed can be achieve up to 40 meters per minute while preforming the process.
In conclusion, this machine is best suitable for garment industry or dyeing & printing units.
Technical Specification
- Speed of the Machine from O to 40 Meters./ Mins.
- Speed Variation by A. C. Inverter with 2HP x 1500 RPM Motor and Suitable Gear Box for Batching and 1 HP x 1500 RPM Motor with Gear Box and A. C. Inverter for opening of the Fabric Roll.
- Reverse-Stop-Forward Arrangement through A. C. Inverter.
- Roll Compact with 5.5″ Dia.
- M.S. Rubber Stripped Rolls 2 Nos. & 3″ Dia Guide Rollers.
- Revolution Type Meter Counter.
- Batching on operator rolls or opposite side as required by you.
- Transparent & Inclined inspection table with top & bottom illumination.
- Strong Built closed side frames to withstand width & weight of the fabric.
- Cloth Inspection & winding unit are completely wired electrically.
- Only main supply is to be provided.
Payment, Taxes and Delivery
Payment: 50% Advance online & Balance against Proforma Invoice prior to dispatch.
Delivery: Delivery of machine is ideally comes within 4 to 6 weeks.
Freight: Will be paid by the customer.
Sales Tax: GST 18% Or Vat 4% +1% No CST against form “H”( export orders).
Erection: Will be charged extra per machine over and above given price.
1. Select Product
Choose the required specification & submit the details.
2. Get Offer
Get a Detailed Offer.
3. Pay The Advance
Pay the advance amount as per agreed terms.
4. Product Under Construction
Product goes under Construction according agreed time.
5. Pay The Rest Amount
Pay the balance amount as your machine get ready to dispatch.
6. Shipment Initiated
Shipment option available through Manufacturer.
7. Installation
Finally, the product will be installed at your plant.
| Fabric Width | 1000 mm, 1100 mm, 1200 mm, 1300 mm, 1400 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm, 2300 mm, 2400 mm, 2500 mm, 2600 mm, 2700 mm, 2800 mm, 2900 mm, 3000 mm, 3100 mm, 3200 mm, 3300 mm, 3400 mm, 3500 mm |
|---|---|
| Maximum Roll Size | 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm, 900 mm, 1000 mm |
Based on 0 reviews
Be the first to review “Fabric Inspection Fold/Roll”
-
Dyeing Machinery
Long Tube Jet
Long tube Jet dyeing machine working concept is same compare with Convention Rapid long tube jet dyeing machine. Though the major advantage of this machine is liquor ration is nearly half than conventional rapid Jet dyeing machine. In this machine fabric does not float but it run nearly in dry condition. Another benefit of this machine is it’s single vessel with two chamber design. Due to this design fabric loop length is reduce additionally bringing down the running cost, capital cost as well as processing time.
[spbsm-follow-buttons]
SKU: n/a -
Finishing Machinery
Relax dryer
The Relax Dryer is the finishing machine to dry hosiery fabric after the fabric has been washed or processed. This Relax Dryer has the following features in it.
- Firstly, The air movement produces undulations in the cloth & at the same time, it expands the knitted fabric causing dimensional shrinkage and selvedge opening.
- In other words, Relax Dryer expands the fabric width while drying it.
- Secondly, Relax Dryer rolls ladder-proof fabrics based on well-known the principle of air impact drying system.
- Thirdly, the cloth moved through the drying chamber on a conveyor belt that overfed to increase length shrinkage.
- Fourthly, The operating width of the Relax Dryer can range from 1600mm to 4200mm. Depending on the specific needs of the client.
- Fifthly, Relax Dryer can process fabric ranging from 70 to 700 gsm/meter square of hosiery.
- Sixth and most Important, velocity can be achieved up to 60 meters per minute while performing the process.
In conclusion, Relax Dryer is best suitable for Dyeing & Printing units.
🔸 Technical Specification
✅The number of chambers: 2 to 8.
✅Conveyor belt width: 1600mm to 4200mm.
✅ Heating system alternatives: Natural Gas, LPG, Steam or Thermic Oil.
✅ Mechanical belt speed: Step less than 0 to 60m/min.
✅ Maximum working temperature: 220 °C.
✅ Blowers: Special design, highly efficient, diagonal location, two blowers in each chamber.
✅ Fabric feeding: Step-less by multiple points.
✅ Conveyor belt direction control: Electro-pneumatic from both sides.
SKU: RD001 -
Dyeing Machinery
CP Dyeing
CP Dyeing
CP Dyeing is dyeing machinery to Dye Fabrics rapidly. Dye Fabric. This machine has the following features.
- First, it dyes the cloth with reactive colours. The CP Dyeing is installed with a small vat & shaped to allow fabrics an adequate contact time for absorbing dye bath through the high speed of cloth.
- In other words, CP Dyeing dyes the cloth rapidly, with less place required.
- Secondly, Reduced liquor volume is possible due to the fast exchange of fluid. Therefore, less wastage of resources.
- Thirdly, CP Dyeing‘s Roller width can be made from 1200mm to 3000mm depending on the client’s need.
🔶 Special Features:
✅ Versatile because it is equally suitable for Light and Heavy fabrics.
✅ Utilising of “Two Nip Two Dip” method ensures consistent colour penetration.
✅ The Top rubber roller is anti-deflecting construction.
✅ On Nips, pneumatic loading can be as much as 6 tons.
✅ Minimum loss of dye liquor because of low Dye liquor content in the trough.
✅ The main Batcher can batch cloth up to 1500mm Dia.
✅ Drive to both padder & Batcher by inverter-controlled AC Drive.
✅ Minimum tension between padder & Batcher is for perfect winding of cloth.
✅ The minimum distance between Padder & Batcher is to avoid oxidation.
✅ Machines are available from 1200mm to 3000mm roller width.
SKU: n/a -
Boiler, Heating Solution
Gas Boiler
GAS Boiler
The Gas Boiler is a packaged three-pass smoke tube with a total wet back boiler. Gas Boiler comes in two three series for burning light oils & gas and heavy oils.
The Gas Boiler also can be customized to a complete skid mount unit on customer demand.
When fitted with a particular burner, these boilers are ideal for burning waste gases like biogas from the decomposition of organic matter in distilleries.
🔸 PRODUCTS FEATURES:
✅ Three-pass smoke tube with complete wet back boiler.
⭕ Multi-fuel option – light oils/heavy oils/gases
✅ High efficiency of about 88% to 95%
✅ High dryness fraction steam increases usable heat.
✅ Gas Boiler Comes with mono-block/ dual block/steam atomized burner with world-renowned Technology from (ITALY)
⭕ An additional option of oil pre-heater confirming EN safety standards
✅Corrugated furnaces for boilers above 6 TPH capacity.
⭕ Optional PLC-based control panels that would be linked to SCADA or DCS systems.🔸 Operating Range:
➡ Capacities In the range of 1.0 TPH to 15 TPH
➡ Pressure: In the range of 10.54 to 17.54 Kg/cm2 (g)
➡ Firing fuels: LDO, FO, LSHS & Natural Gas
➡ Efficiency: Overall efficiency of 88 % (+/-2%) on NCV
SKU: H/GB-1 -
Accessories
Roll Wrapping
Roll Wrapping
Fabric Roll wrapping machine is one of the most required Accessories for pre-delivery processes in Textile plants and Mills. The primary object of the fabric roll wrapping machine is to wrap ready-to-ship rolls so that the fabric remains safe while being delivered to the customer.
Fabric Roll wrapping machines can wrap material rolls of Denim Cloth, Curtain Cloth, Carpets, Foam sheets, Upholsteries, Fabrics, Film, Paper etc. which have a Maximum roller height from ground level up to 400 millimetres.
The fabric Roll wrapping machine is simple to operate, and the sturdy & safe control panel makes it easy to load and unload the fabric roll with the ease of integration into conveyor lines.
With a speed of up to 50 meters per minute, making 20 to 40 rolls per hour while performing variable overlap, amount of stretch, and roller speed, the fabric roll wrapping machine saves labour, time and money.
Because of its unique construction, traverse can accommodate a variety of roll widths. Maximum stretch Power Roller Pre-Stretch Carriage with Pre-Stretch Ratio adjustable up to 300% (Depending upon Film Gauge & Quality).
Inshot fabric Roll wrapping/Stretch wrap machines make it possible to wrap, store and protect ready-to-ship rolls while protecting rolls from dirt and damage.
Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.
🔸 Technical Specification
✅ Maximum roller height from ground level up to 400mm can be processed.
✅ Speed up to 50 meters/minute.
✅ Maximum stretch Power Roller Pre-Stretch Carriage with Pre-Stretch Ratio adjustable up to 300% (Depending upon Film Gauge & Quality).
✅ Rolls/Hour: 20-40 rolls.
✅ Weight/Roll: 400kgs
✅ Roll Diameter: 600mm
✅ Roll Width: 2100mm (As Par Fabric width)
SKU: A/WR-1-1 -
Batching, Makeup Machinery
Batch Unwinding Device
Batch Unwinding Device use to unwind fabric by which fabric can be process in loose form so fabric can be wash, dye or rechecked. it comes with following features
- Firstly, it comes “J” Type Scray for collection of excess fabric which helps collet fabric at one place.
- Secondly, 1000 mm roller length can be unwind.
- Thirdly, 1000 mm width to 3500 mm of machine working width can be made as per customer need.
- Fourthly and most importantly fabric can be unwind with Speed up to 50meters/minute.
In conclusion, this machine is best suitable for garment industry, fabric warehouse or dyeing & printing units.
[spbsm-follow-buttons]
SKU: n/a
Related products
-
Batching, Makeup Machinery
Fabric Rolling
The prime objective of fabric rolling is to roll fabric on paper tube or PVC pipe from loose/fold form which makes easy to store fabric in an organised way. Meanwhile, recognising fabric before shipping it.
- Firstly, Rolls can be made from 100mm to 1000mm depending on need.
- Secondly, Machine working width can be made from 1000mm to 3500mm depending on client’s need.
- Thirdly, Fabric ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be roll on this machine.
- Forth and most importantly the speed can be achieve up to 40 meters per minute while preforming the process.
In conclusion, this machine is best suitable for garment industry or fabric warehouse.
[spbsm-follow-buttons]
SKU: n/a -
Batching, Makeup Machinery
Fabric Inspection Unwinding-Winding
Is to be use for multiple applications, In this Fabric Inspection Unwinding-Winding machine there are following features in it.
- Firstly, it does inspection of the fabric to know if there any fault are there in fabric or to understand nature of it which came in factory for dyeing/printing/processing operations.
In other words, fabric is need to be check before starting any processes on it - Secondly, it roll fabric on batching trolley from fold/loose form by pressure roll assisted with twin – Pneumatic Cylinders, AC Motor & Gearbox..
- Thirdly, Fabric can be print while unwind & winding process is going on
- Fourthly, Machine working width can be made from 1000mm to 3500mm depending on client’s need.
- Fifthly, Fabric ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be roll on this machine.
- Sixth and most importantly the speed can be achieve up to 30 meters per minute while preforming the process.
In conclusion, this machine is best suitable for garment industry or Dyeing & printing plants or Export house.
[spbsm-follow-buttons]
SKU: n/a - Firstly, it does inspection of the fabric to know if there any fault are there in fabric or to understand nature of it which came in factory for dyeing/printing/processing operations.
-
Batching, Makeup Machinery
Double Folding & Plating
Is to be use for multiple applications, In this Double Folding machine there are following features in it.
- Firstly, it does cross fold to make it easy to organize batches which take less space. In other words, less space and more batches to place.
- Secondly, it fold fabric in platting from loose/roll form
- Thirdly, it also measure the fabric by optional given meter counter.
- Fourthly, Machine working width can be made from 41″/36 (Small)* to 72″/67 (Large) depending on client’s need.
- Fifthly, Fabric ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be fold on this machine.
- Sixth and most importantly the speed can be achieve up to 50 meters per minute while preforming the process.
In conclusion, this machine is best suitable for Dyeing & Printing Units or Export house.
[spbsm-follow-buttons]
SKU: n/a -
Batching, Makeup Machinery
Batch Unwinding Device
Batch Unwinding Device use to unwind fabric by which fabric can be process in loose form so fabric can be wash, dye or rechecked. it comes with following features
- Firstly, it comes “J” Type Scray for collection of excess fabric which helps collet fabric at one place.
- Secondly, 1000 mm roller length can be unwind.
- Thirdly, 1000 mm width to 3500 mm of machine working width can be made as per customer need.
- Fourthly and most importantly fabric can be unwind with Speed up to 50meters/minute.
In conclusion, this machine is best suitable for garment industry, fabric warehouse or dyeing & printing units.
[spbsm-follow-buttons]
SKU: n/a
There are no reviews yet.