A Frame
A-FRAME Trolley
A-Frame trolley is one of the most required Accessories in Textile Plant and Mills. A-frame’s objective is to carry the fabric and make it easy to manoeuvre inside the facility while different processes such as measuring, washing, cleaning, dyeing or printing, and finishing.
A-frame trolleys are also Utilised in rotating stations by simply adding an extension to them.
A-frame trolleys come in different sizes from 44 to 130 inches roller width depending on the customer. A-frame trolleys take less space than bucket/box-type trolleys. It gets easier to manage them and store them in one place.
Inshot A-Frame Tolleys are best to manage and store the grey to finished material in a clean and sorted way that helps to identify the fabric lot.
Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.
🔸 Technical Specification
✅ A FRAME’s top roll fabricate from M.S. Seamless Pipe (Ebonite quoting).
✅ The end shaft is RIB constructed or As per the buyer’s suggestion.
⭕ Cladding of S.S. Sheet on a batch roll. (Optional)
✅ The front side pooling system is a swivel-type M.S. fabricated bracket with 10″ x 2 wheels.
✅ The rare side is of fixed type 12″ x 3″ wheel.
✅ Batch coupling is fit on a batch roll for rotating.
✅ A-FRAME is manufactured from an M.S. channel (100/50mm) x 6mm wall thickness.
₹35,000.00
Compare
A-FRAME Trolley
A-Frame trolley is one of the most required Accessories in Textile Plant and Mills. A-frame’s objective is to carry the fabric and make it easy to manoeuvre inside the facility while different processes such as measuring, washing, cleaning, dyeing or printing, and finishing.
These trolleys are also Utilised in rotating stations by simply adding an extension to them.
These trolleys come in different sizes from 44 up to 130 inches roller width depending on the customer. trolleys take less space than bucket/box type trolleys. It gets easier to manage them and store them in one place.
🔸 Technical Specification
✅ A FRAME’s top roll fabricate from M.S. Seamless Pipe (Ebonite quoting).
✅ The end shaft is RIB constructed or As per the buyer’s suggestion.
⭕ Cladding of S.S. Sheet on a batch roll. (Optional)
✅ The front side pooling system is a swivel type M.S. fabricated bracket with 10″ x 2 wheels.
✅ The rare side is of fixed type 12″ x 3″ wheel.
✅ Batch coupling is fit on a batch roll for rotating.
✅ A-FRAME is manufactured from an M.S. channel (100/50mm) x 6mm wall thickness.
🔸 Payment, Taxes and Delivery
Payment: Before dispatch of machinery, 40% advance and a balance against the proforma invoice.
Delivery: Delivery of machine ideally comes within 4 to 6 weeks.
Freight: Will be paid by the customer.
Sales Tax: GST 18% (Domestic Orders) Or Vat 4% +1% No CST against form “H”( export orders).
Installation: Will be charged extra per machine over and above the price.
1. Select Product
Choose the required specification & submit the details.
2. Get Offer
Get a Detailed Offer.
3. Pay The Advance
Pay the advance amount as per agreed terms.
4. Product Under Construction
Product goes under Construction according agreed time.
5. Pay The Rest Amount
Pay the balance amount as your machine get ready to dispatch.
6. Shipment Initiated
Shipment option available through Manufacturer.
7. Installation
Finally, the product will be installed at your plant.
A-Frame | Accessories | 44" to 130" Roller | Best for Mills
A-frame trolly is one of the most required Accessories in Textile Plant and Mills. A-frame's objective is to carry the fabric and make it easy to manoeuvre.
Product SKU: A/T-1
Product Brand: Indian
Product Currency: ₹
Product Price: 35000
Price Valid Until: 2023-08-01
Product In-Stock: PreOrder
4
| Roller Width | 1400 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm, 2300 mm, 2400 mm, 2500 mm, 2600 mm, 2700 mm, 2800 mm, 2900 mm, 3000 mm, 3100 mm, 3200 mm |
|---|
A-Frame | Accessories | 44" to 130" Roller | Best for Mills
A-frame trolly is one of the most required Accessories in Textile Plant and Mills. A-frame's objective is to carry the fabric and make it easy to manoeuvre.
Product SKU: A/T-1
Product Brand: Indian
Product Currency: ₹
Product Price: 35000
Price Valid Until: 2023-08-01
Product In-Stock: PreOrder
4
Youtube
A-Frame | Accessories | 44" to 130" Roller | Best for Mills
A-frame trolly is one of the most required Accessories in Textile Plant and Mills. A-frame's objective is to carry the fabric and make it easy to manoeuvre.
Product SKU: A/T-1
Product Brand: Indian
Product Currency: ₹
Product Price: 35000
Price Valid Until: 2023-08-01
Product In-Stock: PreOrder
4
Based on 0 reviews
Be the first to review “A Frame”
-
Processing Machinery
Polymeriser
Polymeriser
Polymeriser is to use for fixing printed garments. Polymeriser is an Important part of Processing machinery cause it secures the colour before the washing and finishing. There are the following features in it.
- Firstly, Polymeriser assures perfect fixation of dyes even at higher temperatures. In other words, the Dyes can be permanent before starting the washing and finishing process of the cloth.
- Secondly, It is most suitable for curing Phthalein dye, Pigments, and resin set.
- Thirdly, Pre-dryer removes gaseous fumes from printed fabrics – an exclusive speciality of this Machine. The Machine operates efficiently in the temperature range from 30ºC Temperature to 180ºC and ensures automatic regulation of temperatures within the chamber.
- Fourthly, the width can be made from 1600mm to 3200mm as per the client’s need.
- Fifthly, Garment weighted from 70 to 700 gsm/per meter square can be processed.
- The sixth and most Importantly speed can be achieved up to 40 meters per minute while performing the process.
In conclusion, Polymeriser is best suitable for the garment industry or dyeing & printing plants.
🔸 ADVANTAGES :
➡ Supply with hot air jets, recirculating fans and steam or thermic oil heating for best curing result.
➡ Separate blowers for top and bottom air nozzles.
➡ Its uniformity in temperature, width-wise, length and diagonally.
➡ No dropping by condensation.
➡ Variable speed up to 40 meters per minute by A.C. Inverter System.
➡ It is available in 60 to 150 meters of cloth content curing zone.
SKU: P001 -
Accessories
Rubber Blanket
Rubber Blanket
in the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:
- Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
- Secondly, it ensures a non-stick surface for excellent fabric finish during the shrinkage process of textile.
- Thirdly, the high-quality speciality rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
- Fourthly, a Superior quality Rubber blanket can effortlessly process at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat resistance nature of the Rubber Blanket, it Gives uninterrupted service before stopping the machine from grinding the new smooth surface.
- Fifthly, The good abrasive surface and excellent flex quality of the Rubber Blanket are Expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Banket available in the Indian market.
Moreover, Producers of lightweight, low shrinkage potential, 100% cotton or cotton/polyester, commonly report from 15 million to 20 million meters of productive life.
🔶 Technical Specification
- Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees depending on the fabrics to be processed.
- Fabric Width: offer current width of 1200mm to 3500mm.
- Usually, Rubber Banket should be 150 mm to 200 mm wider than FELT the cloth to be processed.
- Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
- Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, Rubber Blanket thickness depends on the required shrinkage in fabrics.
- The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit type machine 50 mm.
- Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetics dress material etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. thickness Belt of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of Up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage.
In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use the machines like Compressive Shrinking Range or Zero Zero & Comfit.
SKU: n/a -
Boiler, Heating Solution
Gas Boiler
GAS Boiler
The Gas Boiler is a packaged three-pass smoke tube with a total wet back boiler. Gas Boiler comes in two three series for burning light oils & gas and heavy oils.
The Gas Boiler also can be customized to a complete skid mount unit on customer demand.
When fitted with a particular burner, these boilers are ideal for burning waste gases like biogas from the decomposition of organic matter in distilleries.
🔸 PRODUCTS FEATURES:
✅ Three-pass smoke tube with complete wet back boiler.
⭕ Multi-fuel option – light oils/heavy oils/gases
✅ High efficiency of about 88% to 95%
✅ High dryness fraction steam increases usable heat.
✅ Gas Boiler Comes with mono-block/ dual block/steam atomized burner with world-renowned Technology from (ITALY)
⭕ An additional option of oil pre-heater confirming EN safety standards
✅Corrugated furnaces for boilers above 6 TPH capacity.
⭕ Optional PLC-based control panels that would be linked to SCADA or DCS systems.🔸 Operating Range:
➡ Capacities In the range of 1.0 TPH to 15 TPH
➡ Pressure: In the range of 10.54 to 17.54 Kg/cm2 (g)
➡ Firing fuels: LDO, FO, LSHS & Natural Gas
➡ Efficiency: Overall efficiency of 88 % (+/-2%) on NCV
SKU: H/GB-1 -
Dyeing Machinery
Regular Jet
Regular Jet dyeing
This machine is best for polyester fabric dyeing cause it runs on a high pressure of high-temperature water. Regular Jet dyeing is economical because the low liquor ratio reduces everything.
The fabric inside this polyester dyeing machine moves solely due to the force of water.
It is user-friendly because, If we compare it with a Long tube dyeing machine. Four valves are necessary to control the fabric’s motion. Here in Regular Jet dyeing, there is only one valve.
Absent of reel, reduce connecting electric power, maintenance of two mechanical seals and breakdown time if Jet pressure and reel speed are not synchronized.
Nearly 4000 without fabric drive reel devices are saving energy and lowering pollution in 20 countries.
🔸 Technical Specification
✅ Capacity: 25 to 400Kg.(Single Tube)
✅Ultra Low Liquor Ratio – 1:1 (Wet Fabric)
✅ Dye – 30 To 450 Grms./Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
✅ High Temp. – Up to 140 ° C.
✅ Fabric Speed – 300 Mtr./Min.
✅ Vessel: SS 316 LBest Polyester dyeing machine with a low liquor ratio in a Jet dyeing form.
SKU: D/JD-1 -
Dyeing Machinery
CP Dyeing
CP Dyeing
CP Dyeing is dyeing machinery to Dye Fabrics rapidly. Dye Fabric. This machine has the following features.
- First, it dyes the cloth with reactive colours. The CP Dyeing is installed with a small vat & shaped to allow fabrics an adequate contact time for absorbing dye bath through the high speed of cloth.
- In other words, CP Dyeing dyes the cloth rapidly, with less place required.
- Secondly, Reduced liquor volume is possible due to the fast exchange of fluid. Therefore, less wastage of resources.
- Thirdly, CP Dyeing‘s Roller width can be made from 1200mm to 3000mm depending on the client’s need.
🔶 Special Features:
✅ Versatile because it is equally suitable for Light and Heavy fabrics.
✅ Utilising of “Two Nip Two Dip” method ensures consistent colour penetration.
✅ The Top rubber roller is anti-deflecting construction.
✅ On Nips, pneumatic loading can be as much as 6 tons.
✅ Minimum loss of dye liquor because of low Dye liquor content in the trough.
✅ The main Batcher can batch cloth up to 1500mm Dia.
✅ Drive to both padder & Batcher by inverter-controlled AC Drive.
✅ Minimum tension between padder & Batcher is for perfect winding of cloth.
✅ The minimum distance between Padder & Batcher is to avoid oxidation.
✅ Machines are available from 1200mm to 3000mm roller width.
SKU: n/a -
Finishing Machinery
Stenter
The Stenter or Hot air Stenter Machine is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities give the fabric the final result of all the processes it went through.
Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out.
It also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.
Stenter comes with the following advance and improved features:
🔶 Higher Production Speeds
✅ Use of elongated oval Nozzle slits for higher air velocity.
✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
✅ High-energy blower fans displace high volumes of air.
✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.🔶 Efficiency
✅ Double-jacketed sealed provides the best insulation.
✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
✅ All pipelines are installed inside the machine to cut out conduction losses.
✅ Give 15% More Saving against other stenter.🔶 Maintenance
✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
✅ Online sliding filters for lint removal.
✅ Easy access inside chambers for observation.
✅ Advanced chamber technology makes it easy to install and reinstall if needed without interfering with the performance.Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.
As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.
In Conclusion, this machine is best for Dyeing and Printing Plants.
SKU: S001
Related products
-
Accessories
Rubber Blanket
Rubber Blanket
in the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:
- Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
- Secondly, it ensures a non-stick surface for excellent fabric finish during the shrinkage process of textile.
- Thirdly, the high-quality speciality rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
- Fourthly, a Superior quality Rubber blanket can effortlessly process at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat resistance nature of the Rubber Blanket, it Gives uninterrupted service before stopping the machine from grinding the new smooth surface.
- Fifthly, The good abrasive surface and excellent flex quality of the Rubber Blanket are Expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Banket available in the Indian market.
Moreover, Producers of lightweight, low shrinkage potential, 100% cotton or cotton/polyester, commonly report from 15 million to 20 million meters of productive life.
🔶 Technical Specification
- Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees depending on the fabrics to be processed.
- Fabric Width: offer current width of 1200mm to 3500mm.
- Usually, Rubber Banket should be 150 mm to 200 mm wider than FELT the cloth to be processed.
- Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
- Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, Rubber Blanket thickness depends on the required shrinkage in fabrics.
- The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit type machine 50 mm.
- Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetics dress material etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. thickness Belt of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of Up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage.
In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use the machines like Compressive Shrinking Range or Zero Zero & Comfit.
SKU: n/a -
Accessories
Roll Wrapping
Roll Wrapping
Fabric Roll wrapping machine is one of the most required Accessories for pre-delivery processes in Textile plants and Mills. The primary object of the fabric roll wrapping machine is to wrap ready-to-ship rolls so that the fabric remains safe while being delivered to the customer.
Fabric Roll wrapping machines can wrap material rolls of Denim Cloth, Curtain Cloth, Carpets, Foam sheets, Upholsteries, Fabrics, Film, Paper etc. which have a Maximum roller height from ground level up to 400 millimetres.
The fabric Roll wrapping machine is simple to operate, and the sturdy & safe control panel makes it easy to load and unload the fabric roll with the ease of integration into conveyor lines.
With a speed of up to 50 meters per minute, making 20 to 40 rolls per hour while performing variable overlap, amount of stretch, and roller speed, the fabric roll wrapping machine saves labour, time and money.
Because of its unique construction, traverse can accommodate a variety of roll widths. Maximum stretch Power Roller Pre-Stretch Carriage with Pre-Stretch Ratio adjustable up to 300% (Depending upon Film Gauge & Quality).
Inshot fabric Roll wrapping/Stretch wrap machines make it possible to wrap, store and protect ready-to-ship rolls while protecting rolls from dirt and damage.
Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.
🔸 Technical Specification
✅ Maximum roller height from ground level up to 400mm can be processed.
✅ Speed up to 50 meters/minute.
✅ Maximum stretch Power Roller Pre-Stretch Carriage with Pre-Stretch Ratio adjustable up to 300% (Depending upon Film Gauge & Quality).
✅ Rolls/Hour: 20-40 rolls.
✅ Weight/Roll: 400kgs
✅ Roll Diameter: 600mm
✅ Roll Width: 2100mm (As Par Fabric width)
SKU: A/WR-1-1
There are no reviews yet.